Blazin Coils - Juggernaut

FeCrAl (Kanthal)
Price in points: 63 points
Reward points: 3 points
blazin-coils-juggernaut
-30%
£6.30
Old price: £9.00

High quality, consistent and high grade pre-made coil packs for your atomisers.

 

Contents:

Pack contains six of your selected coil type and four sheets of quality japanese cotton. 


The coils are packaged with bags between the cotton and packaged in a box for additional protection. 

Please choose your resistance carefully, stay within the limits of your battery cell(s)
+

Like it's namesake, the juggernaut is a monster of a coil. Clapton coils are laid in parallel then wrapped with a skin of flat ribbon wire to contain the initial vapourisation. Lots of power is needed to get these working as they are so thick the ramp up is slow otherwise but when you get the heat in to them you are rewarded with bountiful vapour and tons of flavour.  Be aware though, these are low resistance and using them in dual coil is not particularly recommended due to battery load. Dual coils can be used but with the wire density used the ramp up is extended so more power is again needed to compensate.

Pack contents:

 6 x pre-made vaping coils
 4 x Japanese cotton pads 

 0.2 ohm Internal Diameter 2mm


It's no longer the like Wild West to find fancy wire coils for your atomisers, Blazin Coils brings you the more intricately built coils all ready wound by machine for consistency and quality and ready to fit into your chosen device.

In each package you will find the likes of your Claptons, Fused Claptons,  Alien Claptons, Staples, Juggernaut, Quad, Twisted and Tiger coils along with a couple of sheets of Japanese Cotton wick to ensure you can extract the finest flavours from your chosen juice.

With most other sellers offering a pair of coils for almost the same cost as our 6 coil + wick packs you have access to quality coils without the hassle and wastage of creating your own while machine wound for the ultimate in accurate and consistant winds from the best available FeCrAl (Kanthal), Stainless Steel and Nickel wires.

Please be aware that fitting your own coils takes skill and practice, we offer no liability toward the safety of your builds and insist that you adhere to the load capacity of your cells. Lower resistances increase amperage loads and should you exceed the capacity of your cell(s) you can create a catastrophic failure.

* due to the nature of the material used some variance is expected on the approximated resistance stated in ohms. Always check your finished coils on a device that will read resistance to ensure this is within the capability of your battery cells.

Brand:
Blazin Coils

Coils

Materials Used:
FeCrAl (Kanthal)

No posts found

Only the customers who have purchased this product can make a review. If you have purchased this product, please Sign in to review.

Related products

Good to know

Popular

Customers also bought